Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2008TRIBUTE S SPORT, 4WDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLSYMPTOM TROUBLESHOOTING (BRAKE SYSTEM)
2008 Mazda Tribute s Sport, 4WD
Symptom Troubleshooting (Brake System)
2008 Mazda Tribute s Sport, 4WDSECTION Symptom Troubleshooting (Brake System)
- Brake System
- Principles of Operation
- Red Brake Warning Indicator
- Inspection and Verification
- Road Test
- Brake Pads
- Brake Discs
- Brake Caliper
- Brake Caliper Guide Pins
- Brake Drums
- Brake Shoes
- Brake Hoses and Tubes
- Non-Pressure Leaks
- Reservoir
- Wheel Cylinder
- Brake Master Cylinder - Normal Conditions
- Brake Master Cylinder - Abnormal Conditions
- Brake Booster
- Parking Brake
- Symptom Troubleshooting Chart - Conventional Brake System, Hydraulic
- Symptom Troubleshooting Chart - Conventional Brake System, Mechanical
- Pinpoint Test 1: Vibration When Brakes Are Applied
- Component Tests - Conventional Brake System
- Anti-Lock Control
- Anti-Lock Brake System (Abs) DTC Chart
- Symptom Troubleshooting Chart - Anti-Lock Brake System (Abs)
- Connector End Views - Anti-Lock Brake System (Abs)
- Pinpoint Test 1: DTC B1676 - Battery Pack Voltage Out Of Range
- Pinpoint Test 2: DTC C1095 - Anti-Lock Brake System (Abs) Hydraulic Pump Motor Circuit Failure
- PINPOINT TEST 3: DTCs C1145 (RF), C1155 (LF), C1165 (RR) OR C1175 (LR) - WHEEL SPEED SENSOR INPUT CIRCUIT FAILURE
- PINPOINT TEST 4: DTCs C1233 (LF), C1234 (RF), C1235 (RR) OR C1236 (LR) - WHEEL SPEED SENSOR INPUT SIGNAL MISSING
- PINPOINT TEST 5: DTCs B2741, C1279, C1280, C1281, C1282, C1516, C1517, C2769, C2770, C2777, C2778 AND U1901 - SENSOR CLUSTER FAULT
- Pinpoint Test 6: The Traction Control/Roll Stability Control System Cannot Be Disabled
- Pinpoint Test 7: The Red Brake Warning Indicator Is Illuminated And The Yellow Abs Warning Indicator Is Not Illuminated
- Parking Brake
- Symptom Troubleshooting Chart - Parking Brake
- Pinpoint Test 1: The Parking Brake Does Not Apply
- Pinpoint Test 2: The Parking Brake Will Not Release
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.