Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1996CROWN VICTORIA POLICE INTERCEPTOR, 4.6 9REPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEBODY, CAB CONTROL SYSTEMSMODULE COMMUNICATIONS NETWORK SYSTEM
1996 Ford Crown Victoria Police Interceptor, 4.6 9
Module Communications Network System
1996 Ford Crown Victoria Police Interceptor, 4.6 9SECTION Module Communications Network System
- Description & Operation
- Component Locations
- On-Vehicle Service
- Trouble Shooting
- Self-Diagnostic System
- Communication System Diagnosis
- Connector Identification
- System Tests
- Notes
- Test A: The Powertrain Control Module Has A Fault On The Tan/Orange And/Or Pink/Light Blue Wire
- Test B: Electronic Automatic Temperature Control Has A Fault On The Tan/Orange And/Or Pink/Light Blue Wire
- Test C: Fault On Tan/Orange And/Or Pink/Light Blue Wire
- Test D: The Fuel Indication Module (FIM) Has An Open Circuit On Tan/Orange And/Or Pink/Light Blue Wire
- Test E: Fault On Tan/Orange And/Or Pink/Light Blue Wires (EATC Not Equipped)
- Test F: Lighting Control Module Does Not Respond
- Test G: The Anti-Lock Brake Module Does Not Respond
- Test H: Driver Seat Module Does Not Respond
- Test J: Driver Door Module Does Not Respond
- Test K: Integrated Air Bag Monitor Does Not Respond
- Test L: No Module Response
- Test M: Lighting Control Module, Integrated Air Bag Module, Driver Door Module And Driver Seat Module Do Not Respond-Vehicles Not Equipped With Anti-Lock Brake (Abs)
- Test N: No Module Response (Vehicles Not Equipped With Driver Seat Module)
- Test P: The Lighting Control Module, Integrated Air Bag Monitor And Driver Door Module Do Not Respond (Vehicles Not Equipped With Anti-Lock Brake (Abs) And Driver Seat Module)
- Test Q: The Lighting Control Module, Integrated Air Bag Monitor And Anti-Lock Brake Module Do Not Respond (Vehicles Not Equipped With Driver Door Module And Driver Seat Module)
- Test R: The Lighting Control Module And Integrated Air Bag Monitor Do Not Respond (Vehicles Not Equipped With Anti-Lock Brake (Abs), Driver Door Module And Driver Seat Module)
- Diagnostic Trouble Code Definitions
- Parameter Identification Definitions
- Special Service Tools
- Wiring Diagrams
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.