SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISELECTRICALGAUGESDRIVER INFORMATION SYSTEMWARNING CHIMESYMPTOM CHART
2006 Infiniti FX35 AWD

Symptom Chart

2006 Infiniti FX35 AWDSECTION Symptom Chart
SYMPTOM CHART

Symptom Diagnoses/Service procedure
All warning chimes do not activate. Perform the following inspections.
  1. "COMBINATION METER BUZZER CIRCUIT INSPECTION ".
  2. "POWER SUPPLY AND GROUND CIRCUIT INSPECTION ".

Replace BCM, found normal function in the above inspections.
Ignition key warning chime does not activate. Without Intelligent Key. Perform the following inspections.
  1. "FRONT DOOR SWITCH (DRIVER SIDE) SIGNAL INSPECTION ".
  2. "KEY SWITCH SIGNAL INSPECTION (WITHOUT INTELLIGENT KEY) ".

Replace BCM, found normal function in the above inspections.
With Intelligent Key, when mechanical key is used. Perform the following inspections.
  1. "FRONT DOOR SWITCH (DRIVER SIDE) SIGNAL INSPECTION ".
  2. "KEY SWITCH AND IGNITION KNOB SWITCH SIGNAL INSPECTION (WITH INTELLIGENT KEY, WHEN MECHANICAL KEY IS USED) ".

Replace BCM, found normal function in the above inspections.
With Intelligent Key, when Intelligent Key is carried with the driver. Refer to "WARNING CHIME FUNCTION MALFUNCTION ".
Light warning chime does not activate. Perform the following inspections.
  1. "FRONT DOOR SWITCH (DRIVER SIDE) SIGNAL INSPECTION ".
  2. "COMBINATION SWITCH INSPECTION ".

Replace BCM, found normal function in the above inspections.
Seat belt warning chime does not activate. Perform "SEAT BELT BUCKLE SWITCH (DRIVER SIDE) SIGNAL INSPECTION ".
Replace BCM, found normal function in the above inspection.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.