Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2010XC70 AWD L6-3.2L VIN 96 B6324S2REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTECHNICAL SERVICE BULLETINS
2010 Volvo XC70 AWD L6-3.2L VIN 96 B6324S2
Computers and Control Systems: Technical Service Bulletins
2010 Volvo XC70 AWD L6-3.2L VIN 96 B6324S2SECTION Technical Service Bulletins
- Recalls
- Customer Interest
- Wheels/Tires - All Wheel Drive Vehicle (AWD) Vibrations
- Computers/Controls - CEM Download Interrupt Recovery
- Drivetrain - DEM Software Updates
- Engine Controls - Engine Oil Level Low Message Displayed
- Computer/Controls - Cust. Preparation Service SW Upgrade
- Engine Controls - MIL ON/Misfire, Leak Detection DTC's
- Emissions - MIL ON/DTC P240700 Set
- Drivetrain Controls - DTC P18897A Stored IN DEM
- Drivetrain - DEM Failure During Software Update
- Wipers - Wiper Motor Intermittently Inop./DTC CEM B11387
- Charging System - Reduced Alternator Performance
- Engine Controls - Poor Performance/MAP Sensor DTC's Set
- By Symptom
- Customer Interest
- Wheels/Tires - All Wheel Drive Vehicle (AWD) Vibrations
- Computers/Controls - CEM Download Interrupt Recovery
- Drivetrain - DEM Software Updates
- Engine Controls - Engine Oil Level Low Message Displayed
- Computer/Controls - Cust. Preparation Service SW Upgrade
- Engine Controls - MIL ON/Misfire, Leak Detection DTC's
- Emissions - MIL ON/DTC P240700 Set
- Drivetrain Controls - DTC P18897A Stored IN DEM
- Drivetrain - DEM Failure During Software Update
- Wipers - Wiper Motor Intermittently Inop./DTC CEM B11387
- Charging System - Reduced Alternator Performance
- Engine Controls - Poor Performance/MAP Sensor DTC's Set
- Erratic Operation
- False instrument warning light/gauges
- Low power/performance
- Recalls
- Vibration
- Customer Interest
- All Technical Service Bulletins
- Wheels/Tires - All Wheel Drive Vehicle (AWD) Vibrations
- Computers/Controls - CAN Error Frame Finder Info.
- Computers/Controls - CEM Download Interrupt Recovery
- Drivetrain - DEM Software Updates
- Engine Controls - Engine Oil Level Low Message Displayed
- Computer/Controls - Cust. Preparation Service SW Upgrade
- Body Controls - BCM Diagnostic Information
- Engine Controls - MIL ON/Misfire, Leak Detection DTC's
- Recall 225 - Engine Control Module(ECM) Software Upgrade
- Emissions - MIL ON/DTC P240700 Set
- Computers/Controls - Usage of RELOAD Software
- Drivetrain Controls - DTC P18897A Stored IN DEM
- Computers/Controls - Various Software Related Issues
- Campaign 223 - ECM Update For 'SOOT FILTER FULL' Message
- Drivetrain - DEM Failure During Software Update
- Wipers - Wiper Motor Intermittently Inop./DTC CEM B11387
- Charging System - Reduced Alternator Performance
- Engine Controls - Poor Performance/MAP Sensor DTC's Set
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.