SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 13 (CVT TRANSAXLE (TH2A))TRANSMISSION MOUNTING SYSTEMINSTALLATIONPITCHING STOPPER
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Pitching Stopper

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Pitching Stopper
WARNING: This page is about a different car, the 2022 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the air breather hose and install the pitching stopper bracket.
    NOTE:

    Tighten the bolt side while holding the nut side. 

    Tightening torque: 

    41 N.m (4.2 kgf-m, 30.2 ft-lb)

    G13233178Courtesy of SUBARU OF AMERICA, INC.
  2. Install the pitching stopper.
    NOTE:

    Install with the front mark (a) facing towards the front of the vehicle. 

    Tightening torque: 

    T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)

    T2: 58 N.m (5.9 kgf-m, 42.8 ft-lb)

    Fig 1: Pitching Stopper Nuts And Bolts (With Torque Specification)
    G13937109Courtesy of SUBARU OF AMERICA, INC.
  3. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE BOOT>INSTALLATION .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.