Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISENGINE MECHANICALMECHANICALENGINE INTAKE SYSTEM (INDUCTION)AIR INTAKE BOOTINSTALLATION

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Air Intake Boot: Installation

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Installation

Connect the PCV hose and set the air intake boot.

Install the clips, and tighten the clamps.

NOTE:

Align the clamp threaded portion with the stopper of the air intake boot. (2.0 L model)

Courtesy of SUBARU OF AMERICA, INC.

Align the clamp hole with the protrusion of the air intake boot. (2.5 L model)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

3 N.m (0.3 kgf-m, 2.2 ft-lb)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.