Overview Of System Components For Gasoline Injection And Ignition System With Direct Injection - GF07.70-P-9998MNB

2021 Mercedes Benz GT C AMG 2D ConvertibleSECTION Overview Of System Components For Gasoline Injection And Ignition System With Direct Injection - GF07.70-P-9998MNB

Engine 178.9 In Model 190 

G16681219Courtesy of MERCEDES-BENZ USA

Shown: model 190.377 

Shown: engine from the top front 

G16681220Courtesy of MERCEDES-BENZ USA

Shown: engine from the front 

G16681221Courtesy of MERCEDES-BENZ USA

Shown: engine from the front 

G16681222Courtesy of MERCEDES-BENZ USA

Shown: engine from the right 

G16681223Courtesy of MERCEDES-BENZ USA

Shown: engine from right rear 

G16681224Courtesy of MERCEDES-BENZ USA

Shown: engine from the left 

G16681225Courtesy of MERCEDES-BENZ USA

Shown: engine from left rear 

G16681226Courtesy of MERCEDES-BENZ USA

Shown: engine with oil container from bottom 

G16681227Courtesy of MERCEDES-BENZ USA

Shown: engine compartment from top 

G16681228Courtesy of MERCEDES-BENZ USA

Shown: Integral carrier from rear in model 190.377 (with code 466 (Active engine mount)) 

G16681229Courtesy of MERCEDES-BENZ USA

Shown: dual-clutch transmission from rear (with code 466 (Active engine mount)) 

G16681230Courtesy of MERCEDES-BENZ USA

Shown: High-pressure fuel circuit 

G16681231Courtesy of MERCEDES-BENZ USA

Shown: Exhaust system from above (with code U78 (Switchable exhaust system)) 

G16681232Courtesy of MERCEDES-BENZ USA

Shown: exhaust system from top (with code U20 (AMG Performance exhaust system can be enabled)) 

G16681233Courtesy of MERCEDES-BENZ USA

Shown: gasoline particulate filter (with code 598 (gasoline particulate filter (OPF) with sensor system)) 

G16681234Courtesy of MERCEDES-BENZ USA

Shown: fan motor from rear 

G16681235Courtesy of MERCEDES-BENZ USA

Shown: air regulation system (model 190.379) 

G16681236Courtesy of MERCEDES-BENZ USA

Shown: Low-temperature circuit from rear, shown on model 190.377 

G16681237Courtesy of MERCEDES-BENZ USA
G16681238Courtesy of MERCEDES-BENZ USA

Shown: Low-temperature circuit from rear, shown on model 190.379 

G16681239Courtesy of MERCEDES-BENZ USA

Shown: Low-temperature circuit from rear, shown on model 190.381 

Fuel tank (except code 494 (USA version)) 

G16681240Courtesy of MERCEDES-BENZ USA

Fuel tank (with code 494 (USA version)) 

G16681241Courtesy of MERCEDES-BENZ USA

Shown: center console from top 

G16681242Courtesy of MERCEDES-BENZ USA
  Component description for instrument cluster A1 GF54.30-P-6000RR
  Head unit, component description Model 190 with engine 178.9
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
A26/17
GF82.85-P-3140RR
    Model 190 with engine 178.9
with code 531 (COMAND APS)
except code 520 (Audio 20 USB)
A26/17
GF82.85-P-3140RRA
    Engine 178.9 in model 190
with code 506 (Audio 20 NTG 5.5 radio)
except code 520 (Audio 20 USB)
except code 531 (COMAND APS)
A26/17
GF82.85-P-3140RRB
  Component description for Audio/COMAND control panel Engine 178.9 in model 190
except code 446 (Touchpad only)
A40/9
GF54.21-P-4501RR
  Component description for DISTRONIC electric controller unit Model 190 with engine 178.9
with code 239 (Adaptive cruise control Pro (DISTRONIC PRO))
A89
GF30.30-P-3213RR
  COLLISION PREVENTION ASSIST controller unit, component description Model 190 with engine 178.9
with code 258 (Collision warning system with active brake application FCW-Stop)
A90
GF30.30-P-3214RR
  Touchpad, component description Engine 178.9 in model 190
with code 446 (Touchpad only)
A105
GF54.21-P-4511RR
  Supplemental restraint system control unit, component description N2/10 GF91.60-P-4080RR
  Component description for ME-SFI (ME) control unit N3/10 GF07.61-P-6000MNB 
  Active engine mount control unit, component description Model 190 with engine 178.9
with code 466 (Active engine mount)
N3/42
GF22.10-P-2001MNB
  AMG sports suspension control unit, component description Model 190 with engine 178.9 with transmission 700.4
with code 466 (Active engine mount)
N3/43
GF54.21-P-1002RR
  Active transmission mount control unit, component description Engine 178.9 in model 190 with transmission 700.4
with code 466 (Active engine mount)
N3/44
GF27.10-P-9613RR
  Component description for front SAM control unit with fuse and relay module N10/1 GF54.21-P-6070RR
  Dual clutch transmission control unit, component description N15/13 GF27.60-P-5171RR
  Climate control control unit, component description N22/1 GF83.40-P-2250RR
  Component description for Electronic Stability Program control unit N30/4 GF42.45-P-5119RR
  Component description for adaptive damping system control unit Model 190 with engine 178.9
with code 479 (AMG RIDE CONTROL sports suspension)
N51/5
GF32.32-P-1010RR
  Component description for left front door control unit N69/1 GF72.29-P-6001RR
  Component description for the electronic ignition lock control unit N73 GF80.57-P-6001RR
  Component description for steering column tube module control unit Engine 178.9 in model 190 up to 11/30/18
up to model year 2019
N80
GF54.21-P-6051RR
    Engine 178.9 in model 190 as of 12/1/18
as of model year 2019
N80
GF54.21-P-6051RRM
  AMG gateway control unit, component description Model 190 with engine 178.9 with transmission 700.4
N93/9
GF54.21-P-1001RR
  Component description for fuel pump control unit N118 GF47.40-P-2001MNB
  Drivetrain control unit, component description N127 GF54.21-P-2141MNB
  Table of contents for function description of gasoline injection and ignition system with direct injection   GF07.70-P-0998MNB 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.