Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Advanced Driver Assistance System Parking Diagnosis (HEV) (2 Of 2)
2024 Kia Niro EXSECTION Advanced Driver Assistance System Parking Diagnosis (HEV) (2 Of 2)
- DTC C1628-87: CAN Time-Out Cluster
- DTC C163C-86: CAN Message Failure TCU_DCT
- DTC C1643-87: CAN Time-Out Yaw Rate & G Sensor
- DTC C1646-86: CAN Message Failure - TCU
- DTC C1651-87: CAN Time-Out EPB
- DTC C1652-86: CAN Signal Error EPB
- DTC C1656-86: CAN Signal Error - Cluster
- DTC C1659-87: CAN Time-Out SAS
- DTC C166B-87: CAN Time-Out Wheel Speed Sensor
- DTC C1671-86: Signal LAT_ACCEL Or LONG_ACCEL Or YAW_RATE Or YL_PRES_STAT Not Valid
- DTC C1687-87: CAN Time-Out VSM2 (MDPS)
- DTC C1688-86: VSM2 (MDPS) Signal Error
- DTC C1694-87: CAN Time-Out FATC
- DTC C1695-86: CAN Message Failure - FATC
- DTC C16B2-86: WHL_SPD Checksum/Alive Counter Error
- DTC C1702-46: Variant Coding Error
- DTC C1812-87: CAN Time-Out Gateway
- DTC C1814-86: CAN Message Failure - SAS
- DTC C1817-86: CAN Signal Error Gateway
- DTC C181C-87: CAN Time-Out LVR
- DTC C182D-87: CAN Time-Out SCU
- DTC C1835-86: CAN Signal Error IEB
- DTC C1836-86: CAN Signal Error LVR
- DTC C183A-86: CAN Message Failure - SCU
- DTC C2247-86: PA Assist Failure - MDPS
- DTC C2249-86: RSPA Assist Failure - ESC/IEB
- DTC C2250-86: RSPA Assist Failure - PT ECU
- DTC C2251-86: RSPA Assist Failure - IBU
- DTC C2252-86: CAN Message Failure IBU
- DTC C2253-87: CAN Time-Out IBU
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.