Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1985BRONCO 5.8 G, STANDARD, TODREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 35 (2.3L EFI EEC IV TESTING)QUICK TESTSCONTINUOUS SELF-TESTCONTINUOUS MEMORY CODES
1985 Ford Bronco 5.8 G, Standard, TOD
Continuous Memory Codes
1985 Ford Bronco 5.8 G, Standard, TODSECTION Continuous Memory Codes
WARNING: This page is about a different car, the 1986 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- To ensure proper diagnosis of continuous memory codes, PREPARATION , EQUIPMENT HOOK-UP , KEY ON/ENGINE OFF (KOEO) SELF-TEST , TIMING CHECK , and KEY ON/ENGINE RUNNING (KOER) SELF-TEST must be successfully completed. If both KEY ON/ENGINE OFF and ENGINE RUNNING SELF-TEST display code 11 (Pass), go to CONTINUOUS MONITOR (WIGGLE) TEST .
- If not, return to PREPARATION step and make the necessary repairs indicated in KEY ON/ENGINE OFF and ENGINE RUNNING SELF-TEST before going to Clearing Continuous Memory Codes .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.