Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2013JOURNEY CREW, AWDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSIS3.6L - DTCS P0160 TO P0480
2013 Dodge and Ram Journey Crew, AWD
3.6L - DTCS P0160 To P0480
2013 Dodge and Ram Journey Crew, AWDSECTION 3.6L - DTCS P0160 To P0480
- Diagnosis And Testing
- P0160-P0160-O2 Sensor 2/2 No Activity Detected
- P0161-O2 Sensor 2/2 Heater Performance
- P0171-Fuel System 1/1 Lean
- P0172-Fuel System 1/1 Rich
- P0174-Fuel System 2/1 Lean
- P0175-Fuel System 2/1 Rich
- P0196-Engine Oil Temperature Sensor Circuit Performance
- P0197-Engine Oil Temperature Sensor Circuit Low
- P0198-Engine Oil Temperature Sensor Circuit High
- P0201-Fuel Injector 1 Circuit
- P0202-Fuel Injector 2 Circuit
- P0203-Fuel Injector 3 Circuit
- P0204-Fuel Injector 4 Circuit
- P0205-Fuel Injector 5 Circuit
- P0206-Fuel Injector 6 Circuit
- P0221-Throttle Position Sensor 2 Performance
- P0222-Throttle Position Sensor 2 Circuit Low
- P0223-Throttle Position Sensor 2 Circuit High
- P0298-Engine Oil Temperature Too High
- P0300-Multiple Cylinder Misfire
- P0301-Cylinder 1 Misfire
- P0302-Cylinder 2 Misfire
- P0303-Cylinder 3 Misfire
- P0304-Cylinder 4 Misfire
- P0305-Cylinder 5 Misfire
- P0306-Cylinder 6 Misfire
- P0315-No Crank Sensor Learned
- P0325-Knock Sensor 1 Circuit
- P0330-Knock Sensor 2 Circuit
- P0335-Crankshaft Position Sensor Circuit
- P0336-Crankshaft Position Sensor Performance
- P0339-Crankshaft Position Sensor Intermittent
- P0340-Camshaft Position Sensor Circuit - Bank 1 Sensor 1
- P0344-Camshaft Position Sensor Intermittent - Bank 1 Sensor 1
- P0345-Camshaft Position Sensor Circuit - Bank 2 Sensor 1
- P0349-Camshaft Position Sensor Intermittent - Bank 2 Sensor 1
- P0365-Camshaft Position Sensor Circuit - Bank 1 Sensor 2
- P0369-Camshaft Position Sensor Intermittent - Bank 1 Sensor 2
- P0390-Camshaft Position Sensor Circuit - Bank 2 Sensor 2
- P0394-Camshaft Position Sensor Intermittent - Bank 2 Sensor 2
- P0420-Catalyst Efficiency (Bank 1)
- P0430-Catalyst Efficiency (Bank 2)
- P0440-General EVAP System Failure
- P0441-EVAP Purge System Performance
- P0443-EVAP Purge Solenoid Circuit
- P0452-EVAP Pressure Switch Stuck Closed
- P0455-EVAP Purge System Large Leak
- P0456-EVAP Purge System Small Leak
- P0457-Loose Fuel Cap
- P0461-Fuel Level Sensor 1 Performance
- P0462-Fuel Level Sensor 1 Circuit Low
- P0463-Fuel Level Sensor 1 Circuit High
- P0480-Cooling Fan 1 Control Circuit
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.