Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2004V70 L5-2.5L TURBO VIN 59 B5254T2REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLEWIRING HARNESSSERVICE AND REPAIRPROCEDURES
2004 Volvo V70 L5-2.5L Turbo VIN 59 B5254T2
Procedures
2004 Volvo V70 L5-2.5L Turbo VIN 59 B5254T2SECTION Procedures
Connectors, transmission, disconnecting / connecting
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information is always correct.
Disassembly
A. Transmission input and output speed sensors.
B. Gear-shift position sensor.
D. Oil temperature sensor solenoids: SLU, SLT and SLS.
C. Solenoids S1 - S5.
Unhook the mounting with the connectors for the transmission from the bracket for the air cleaner (ACL) housing.
Separate the connectors.
Reassembly
Connect the connectors. Ensure that the catches for the connectors are in their positions
Install the mounting on the bracket for the air cleaner (ACL) housing.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.