Signal Description / Specification

2004 Volvo V70 L5-2.5L Turbo VIN 59 B5254T2SECTION Signal Description / Specification





Signal description

Note! For S60/V70 2004- B5254T2 AW55-50SN US-market, see Signal specification Signal Description / Specification.

General
All values stated below are measured between each connection in column 1 (Conn. control module) and breakout box connection #B3 unless otherwise noted in column 6 (Other). The control module's connections #A1-#A70 correspond to #A1-#B10 on the breakout box, #B1-#B50 correspond to #B11- #B60 on the breakout box.

Note! It is important to connect the breakout box and check the ground connections before starting to measure.

Hint: If the numbering of the connector is different from the numbering on the breakout box, the connector number is given first, #A61, followed by the breakout box number in brackets, #B1. Example: #A61 (#B1).

































RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.