Steering/Suspension - Alignment Specifications

2004 Volvo V70 L5-2.5L Turbo VIN 59 B5254T2SECTION Steering/Suspension - Alignment Specifications
TIE - Technical Journal

Title Wheel alignment specifications

Ref No US19674.3.3 en-GB

Issure SDEGRAZ1

Partner 3US7510 Volvo Cars North America

Func Group 6010 Func Desc wheel alignment

Status Released

Status Date 2010-07-21

Issue Date 2010-07-19

Reference VIDA





Attachment





Vehicle Type





CSC

Text
CSC = Customer Symptom Code
DTC = Diagnostic Trouble Code

Note!
If using a printed copy of this Retailer Technical Journal, first check for the latest online version.

NOTE!
THIS DOCUMENT SUPERSEDES THE PREVIOUS RETAILER TECHNICAL JOURNAL 19674 DATED 02-09-2010. Wheel angle specifications for the 2011 S60 have been added. PLEASE UPDATE YOUR FILES.

DESCRIPTION: Wheel angle specifications must be updated more often than the standard VIDA DVD update. Until further notice, Volvo Cars of North America (VCNA) will use this Retailer Technical Journal (RTJ) to update and publish current wheel angles for Front Wheel Drive (FWD) and All Wheel Drive (AWD) models. This RTJ is updated when the designing department at Volvo Car Corporation (VCC) modifies a value for one or more wheel angles or when a new vehicle model is released.

SERVICE:
For the current wheel alignment specifications, please refer to the attached tables. Be sure the alignment equipment at your facility is updated.



































Car Customer Service





RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.