Signal Specification, Brake Control Module (BCM) With DSTC (Dynamic Stability and Traction Control)

2004 Volvo V70 L5-2.5L Turbo VIN 59 B5254T2SECTION Signal Specification, Brake Control Module (BCM) With DSTC (Dynamic Stability and Traction Control)





Signal specification, brake control module (BCM) with DSTC (dynamic stability and traction control)
All values given are between the relevant terminal in column 1 and terminal #A16 or #A47 (ground), unless otherwise indicated in brackets.
Connections 9, 13, 24, 26, 35, 38, 40-41 and 44 are not used.

Note! It is important that the breakout box is connected and that the ground connections have been checked before starting to measure.

















RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.