Temperature Too High

Temperature too high

Checking the wiring and component
The diagnostic trouble code (DTC) was caused by the transmission being subjected to high loads and high temperatures. It is therefore important to change transmission fluid and to check the function of the transmission.
Replace the oil according to Gearbox fluid, replacing Transmission Fluid, Replacing.


Continue - Resetting the oil quality counter

-------------------------------------------------

Resetting the oil quality counter





Resetting Transmission fluid change counter

Resetting Transmission fluid change counter

Hint: The transmission control module (TCM) has a counter for the oil quality. The counter counts up if the transmission is exposed to too high a load or an ambient temperature that is too high. If the counter is not reset when the oil is drained or changed, there is a risk that a diagnostic trouble code (DTC) will be stored in faulty circumstances. Therefore it is important that the "Transmission oil change" counter is reset.

Note! This applies only when the transmission fluid is changed and when the fluid is changed when repairs are carried out to the transmission temperature sensor.




- Ignition on.
Reset the counter by clicking on the VCT 2000 symbol.






Continue - DONE

------------------------

DONE - Test driving

-------------------------------------------------

Test driving
Test drive the car. See Test drive schedule, description, B5244T5, AW55-50/51SN, B5254T2, AW55-50/51SN, B5254T2, AW50/51 AWD Test Drive Schedule, Description.





Does the transmission have any mechanical faults?

Yes - Fault-tracing information

No - DONE

-------------------------------------------------

Fault-tracing information
Exit the current fault-tracing. Add mechanical symptoms to the symptoms list. Fault-trace the symptoms.


Continue - DONE

-------------------------------------------------