Diagnostic Trouble Code (DTC) Information

2004 Volvo V70 L5-2.4L VIN 64 B5244S6SECTION Diagnostic Trouble Code (DTC) Information





Diagnostic trouble code (DTC) information

Condition
Diagnostic trouble code DDM/PDM-0005 is stored if the control module registers a low signal or open-circuit in the M+ signal cable or M- signal cable (the power supply wiring to the power window motor) when the window is operated upwards or downwards.
Diagnostic Trouble Code (DTC) DDM/PDM-0005 can be diagnosed when the power window motor is activated.

Substitute value
- None.

Possible source
- Short-circuit to ground in the M+ or M- signal cables
- Open-circuit in the M+ signal cable or M- signal cable
- Blown fuse.

Fault symptom[s]
- The power window mechanism does not operate.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.