SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLVO2004S80 L6-2.9L TURBO VIN 91 B6294TREPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONMANUFACTURER CODE CHARTSBCM CODES (BRAKE CONTROL MODULE)BCM-0108COMMUNICATION WITH THE STEERING ANGLE SENSOR
2004 Volvo S80 L6-2.9L Turbo VIN 91 B6294T

Communication With the Steering Angle Sensor

2004 Volvo S80 L6-2.9L Turbo VIN 91 B6294TSECTION Communication With the Steering Angle Sensor





Communication with the steering angle sensor. Control module not initiated

Fault-tracing information
The control module for the steering angle sensor is initiated when the steering wheel is turned more than 5° in any direction. Diagnostic trouble code (DTC) BCM-0108 may be stored if the car has been turned for more than 2 minutes without turning the steering wheel. Ask the customer whether this is the case.
If this is not the case, read off diagnostic trouble codes (DTCs) from the steering angle sensor and fault trace according to the information for this system.

Continue - DONE

-------------------------------------------------

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.