Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System settings (customer settings), Japanese market
The following system settings in the control module can regain the base values if the control module power supply fails, when the control module or the battery are changed for example. A new control module is always delivered with the base values set. After the control module is connected, or the power supply returned, the control module settings should be adjusted to the previous market and customer settings.
- Ignition on
- Select Setup with remote control.
- Select Language, System settings and Traffic information to change settings.
| Parameter | Setting, choice |
|---|---|
| Language: | English/Japanese Base value= Japanese |
| Detailed intersection map | ON/OFF Base value= On |
| Mark road driven | ON/OFF Base value= Off |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.