Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSVOLKSWAGEN2012JETTA TDI, 4D SEDAN, STANDARD TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 44 (AIR CONDITIONING (SPORTWAGEN))87 AIR CONDITIONINGSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2012 Volkswagen Jetta TDI, 4D Sedan, Standard Trans
Fastener Tightening Specifications
2012 Volkswagen Jetta TDI, 4D Sedan, Standard TransSECTION Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
| Component | Nm | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| A/C Compressor Bolts | 25 | ||||||||
| Climatic | |||||||||
| Heating and A/C Unit Bracket -Item 3- Screws (1) | 4 | ||||||||
| Heating and A/C Unit Bracket -Items 5, 11- Screws (2) | 8 | ||||||||
| Climatronic | |||||||||
| Heating and A/C Unit Bracket -Item 3- Screws (3) | 4 | ||||||||
| Heating and A/C Unit Bracket -Items 5, 11- Screws (4) | 8 | ||||||||
| Climatronic Control Module | 1.5 ± 0.2 | ||||||||
| Condenser Attaching Screws | 5 | ||||||||
| Expansion Valve Bolts | 5 | ||||||||
| Fluid Reservoir | 4.2 ± 0.7 | ||||||||
| Refrigerant Line Bolts | 12 | ||||||||
| Refrigerant Line at Compressor Bolts | 22 ± 1 | ||||||||
| Generator and A/C Compressor Sub-assembly Bracket Bolts (BRM) | 50 | ||||||||
| Generator and A/C Compressor Sub-assembly Bracket Bolts (BGP and BGQ) | 25 | ||||||||
| Generator and A/C Compressor Sub-assembly Bracket Bolts (BPY) | 40 | ||||||||
|
|||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.