Cruise Control Main Switch ASSY: Replacement

2005 Toyota Matrix XR, FWD, StandardSECTION Replacement
  1. DISCONNECT BATTERY NEGATIVE TERMINAL (SEE  SUPPLEMENTAL RESTRAINT SYSTEM  ) 
  2. INSPECT PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  3. REMOVE HORN BUTTON ASSY (SEE  REPLACEMENT  ) 
  4. REMOVE STEERING WHEEL ASSY (SEE  OVERHAUL  ) 

    SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021)

  5. REMOVE CRUISE CONTROL MAIN SWITCH ASSY 
    1. Remove the 2 screws and cruise control main switch assy.
      Fig 1: Removing Cruise Control Main Switch Assy
      G02632892Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. CENTER SPIRAL CABLE (SEE  OVERHAUL  ) 
  7. INSTALL STEERING WHEEL ASSY (SEE  OVERHAUL  ) 
  8. INSPECT STEERING WHEEL CENTER POINT (SEE  OVERHAUL  ) 
  9. INSPECT HORN BUTTON ASSY (SEE  REPLACEMENT  ) 
  10. INSTALL HORN BUTTON ASSY (SEE  ON-VEHICLE INSPECTION  ) 
  11. INSPECT SRS WARNING LIGHT (SEE  DIAGNOSIS SYSTEM  ) 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.