SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSTOYOTA1985CELICA SUPRA BASE, AUTOMATICREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSOVERHAUL - A43, A44 & A46TESTINGSHIFT SPEED SPECIFICATIONS
1985 Toyota Celica Supra Base, Automatic

Shift Speed Specifications

1985 Toyota Celica Supra Base, AutomaticSECTION Shift Speed Specifications
CRESSIDA A-43DE SHIFT SPEED SPECIFICATIONS(1), (2) and (3)

Application MPH
"D" Position
1st-2nd 29-32
2nd-3rd 56-63
3rd-OD 86-90
OD-3rd 83-86
3rd-2nd 56-59
2nd-1st 27-29
(1) At wide open throttle.
(2) With throttle valve fully open and "Normal" range pattern.
(3) Lock-up "ON" point with closed throttle is 34-37 MPH; lock-up "OFF" with closed throttle is 31-34.
PICKUP 2WD A-43D SHIFT SPEED SPECIFICATIONS (1)

Application MPH
"D" Position
1st-2nd 35-45
2nd-3rd 66-77
3rd-OD (2) No Shift
OD-3rd (3)
3rd-2nd 59-70
2nd-1st 22-30
"L" Position
2nd-1st 29-39
(1) At wide open throttle.
(2) 3-OD upshift point with closed throttle is at 22-29 MPH.
(3) OD-3 downshift is possible up to maximum speed.
PREVIA A-46DE & A-46DF SHIFT SPEED SPECIFICATIONS (1)

Application MPH
"D" Position
1st-2nd 35-38
2nd-3rd 62-68
3rd-OD 89-94
3rd-OD (2) No Shift
OD-3rd (3)
OD-3rd 85-91
3rd-2nd 58-64
2nd-1st 31-34
"2" Position
1st-2nd 35-38
3rd-2nd 62-66
2nd-1st 31-34
"L" Position
2nd-1st 31-34
(1) At wide open throttle.
(2) 3-OD upshift point with closed throttle is at 24-27 MPH.
(3) OD-3 downshift point with closed throttle is at 16-19 MPH.
4RUNNER 2WD A-44D SHIFT SPEED SPECIFICATIONS (1)

Application MPH
"D" Position
1st-2nd 29-34
2nd-3rd 58-64
3rd-OD (2) No Shift
OD-3rd (3)
3rd-2nd 51-57
2nd-1st 19-26
"L" Position
2nd-1st 25-32
(1) At wide open throttle.
(2) 3-OD upshift point with closed throttle is at 22-29 MPH.
(3) OD-3 downshift is possible up to maximum speed.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.