Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 96 (CONTINUOUSLY VARIABLE TRANSAXLE (CVT))DIAGNOSTIC INFORMATION AND PROCEDURESLINE PRESSURE TESTTROUBLESHOOTING
2013 Suzuki SX4 Crossover, Automatic CVT Trans
Line Pressure Test: Troubleshooting
2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Troubleshooting
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM DIAGNOSIS DESCRIPTION CHART
| Condition | Possible Cause | Action |
|---|---|---|
| Higher than standard level in "D" and "R" range | Faulty valve body component | Perform "SOLENOID VALVE ON-VEHICLE INSPECTION ". |
| Lower than standard level in "D" and "R" range | Faulty valve body component | Perform "SOLENOID VALVE ON-VEHICLE INSPECTION ". |
| Clogged oil strainer | Replace CVT assembly . | |
| Faulty oil pump | Replace CVT assembly . | |
| Faulty primary pulley | Replace CVT assembly . | |
| Faulty secondary pulley | Replace CVT assembly . | |
| Faulty torque converter | Replace CVT assembly . | |
| Lower than standard level only in "D" range | Faulty forward clutch | Replace CVT assembly . |
| Lower than standard level only in "R" range | Faulty reverse brake | Replace CVT assembly . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.