SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 49 (BRAKES - REAR)REPAIR INSTRUCTIONSREAR DISC BRAKE BACKING PLATE REPLACEMENT
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Rear Disc Brake Backing Plate Replacement

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Rear Disc Brake Backing Plate Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Disc Brake Backing Plate
G04843910Courtesy of SUZUKI OF AMERICA CORP.
BRAKE PAD SPECIFICATION TABLE

Callout Component Name
WARNING: Refer to BRAKE DUST CAUTION .
Preliminary Procedures 
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the tire and wheel. Refer to REMOVAL PROCEDURE .
  3. Remove the park brake shoes. Refer to PARK BRAKE SHOE REPLACEMENT .
  4. Remove the wheel speed sensor. Refer to REAR WHEEL SPEED SENSOR REPLACEMENT .
  5. Disconnect the park brake cable from the actuator and mounting bracket. Refer to REMOVAL PROCEDURE .
  6. Remove the wheel bearing/hub assembly. Refer to REMOVAL PROCEDURE .
1 Disc Brake Backing Plate
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.