SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2013SX4 CROSSOVER, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 47 (BRAKES - FRONT)REPAIR INSTRUCTIONSFRONT BRAKE SHIELD REPLACEMENT
2013 Suzuki SX4 Crossover, Automatic CVT Trans

Front Brake Shield Replacement

2013 Suzuki SX4 Crossover, Automatic CVT TransSECTION Front Brake Shield Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Brake Shield
G04843883Courtesy of SUZUKI OF AMERICA CORP.
BRAKE PAD SPECIFICATION TABLE

Callout Component Name
WARNING: Refer to BRAKE DUST CAUTION .
Preliminary Procedures 
  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the tire and wheel. Refer to REMOVAL PROCEDURE .
  3. Without disconnecting the brake caliper hose, remove the brake caliper and bracket as an assembly and support with heavy mechanics wire or equivalent. Refer to FRONT BRAKE CALIPER BRACKET REPLACEMENT .
  4. Remove the front brake rotor. Refer to FRONT BRAKE ROTOR REPLACEMENT .
  5. Remove the wheel bearing/hub. Refer to REMOVAL PROCEDURE .
1 Disc Brake Splash Shield
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.