Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 14 (AUTOMATIC TRANSMISSION)SPECIFICATIONSTRANSMISSION GENERAL SPECIFICATIONS
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD
Transmission General Specifications
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Transmission General Specifications
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION GENERAL SPECIFICATIONS
| Name | AF33-5 |
|---|---|
| RPO Codes | M09 or M45 |
| Vehicle Platform Engine/Transmission Usage | L - SUV 3.6L LY7 |
| Transmission Drive | FWD or AWD |
| 1st Gear Ratio | 4.575 |
| 2nd Gear Ratio | 2.979 |
| 3rd Gear Ratio | 1.947 |
| 4th Gear Ratio | 1.318 |
| 5th Gear Ratio | 1.000 |
| Reverse Ratio | 5.024 |
| Pressure Taps | Line Pressure |
| Transmission Fluid Type | T - IV |
| Transmission Fluid Capacity - Approximate | Complete Overhaul: Dry 7.8L (8.2 qt) |
| Transmission Type: 5 | Five Forward Gears, Clutch to Clutch Shifting |
| Case Material | Die Cast Aluminum |
| Transmission Weight | 90 kg (198 lb) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.