Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 14 (AUTOMATIC TRANSMISSION)REPAIR INSTRUCTIONSCONTROL VALVE BODY COVER REPLACEMENTREMOVAL PROCEDURE
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD
Removal Procedure
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Removal Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
- Remove the left front wheel and tire assembly. Refer to REMOVAL PROCEDURE .
- Remove the left and right splash shield. Refer to ENGINE SPLASH SHIELD REPLACEMENT - LEFT SIDE and ENGINE SPLASH SHIELD REPLACEMENT - RIGHT SIDE .
- Remove the front engine mount. Refer to REMOVAL PROCEDURE .
- Remove the transaxle oil cooler lines and seals from the transaxle. Refer to REMOVAL PROCEDURE .
- Remove the 9 TORX bolts (2) from the control valve body cover (1).NOTE: Do not pry with a tool on the transaxle control valve body cover, case or sealing surfaces.
- Remove control valve body cover.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.