SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 12 (POWER SEAT SYSTEM)REPAIR INSTRUCTIONSREAR SEAT HEAD RESTRAINT GUIDE REPLACEMENT (INNER)
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD

Rear Seat Head Restraint Guide Replacement (Inner)

2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Rear Seat Head Restraint Guide Replacement (Inner)
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Seat Center Head Restraint & Guides
G04843027Courtesy of SUZUKI OF AMERICA CORP.
REAR SEAT HEAD RESTRAINT GUIDE COMPONENTS REFERENCE

Callout Component Name
Preliminary Procedure 
Remove the rear seat back filler panel. Refer to REAR SEAT BACK FILLER PANEL REPLACEMENT .
1 Rear Seat Center Head Restraint
  1. Push the button in and raise the head restraint to the full-up position.
  2. Insert a small round tool into the guide hole
  3. Pull up to remove the head restraint.
2 Rear Seat Center Head Restraint Guides
  1. Disconnect the seat back cover j-channed from the seat back frame.
  2. Loosen the bottom of the seat back cover enough to reach up to access the head restraint guides.
  3. Squeeze the bottom of the guides together and push upward to remove.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.