SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUZUKI2009EQUATOR SPORT, 4D PICKUP EXTRA CAB, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 12 (POWER SEAT SYSTEM)REPAIR INSTRUCTIONSREAR SEAT BACK FILLER PANEL REPLACEMENT
2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WD

Rear Seat Back Filler Panel Replacement

2009 Suzuki Equator Sport, 4D Pickup Extra Cab, 4WDSECTION Rear Seat Back Filler Panel Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Seat No. 1 Back Panel Screws
G04843045Courtesy of SUZUKI OF AMERICA CORP.
COMPONENTS REFERENCE

Callout Component Name
Preliminary Procedure 
  1. Remove the rear seat. Refer to REMOVAL PROCEDURE .
  2. Loosen the seat back cover from the seat back filler panel. It is hooked into the slots of the panel.
  3. Slide the rear seat back cover up the seat back enough to gain access to the seat back filler panel screws.
1 Rear Seat No. 1 Back Panel Screw (Qty: 9)
CAUTION: Refer to FASTENER NOTICE .

Tightening torque 
9 N.m (80 lb in) 
2 Rear Seat No. 1 Back Panel
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.