Warning Light Illumination Pattern: Inspection

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Inspection
  • Except for HEV model
    • When the ignition switch is turned to ON (engine OFF), the STEERING warning light illuminates.
    • After starting the engine, the STEERING warning light goes out. If it does not go off, a malfunction occurs in electric power steering β€’ combination meter.
  • HEV model
  • When the ignition switch is turned to ON (EV system OFF), the STEERING warning light illuminates.
  • After EV system start (READY signal is received), the STEERING warning light goes out. If it does not go off, a malfunction occurs in electric power steering β€’ combination meter.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.