SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSAIRBAG SYSTEMFRONT SUB SENSORREMOVAL
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Front Sub Sensor: Removal

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Removal
CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to  AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION  . 

  1. Turn the ignition switch to OFF.
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE:

    For the hybrid model, disconnect the battery negative terminal. 

  3. Remove the front sub sensor.
    1. Remove the clips and remove the air intake duct. (When removing the sensor RH)
      G11245816Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the bolt, and then detach the front sub sensor.
    3. Disconnect the connector of front sub sensor. Ref. to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>FRONT SUB SENSOR AND SATELLITE SAFING SENSOR .
      G11245817Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.