SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSAIRBAG SYSTEMAIRBAG CONNECTORPROCEDUREFRONT SUB SENSOR AND SATELLITE SAFING SENSOR
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Front Sub Sensor And Satellite SAFING Sensor

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Front Sub Sensor And Satellite SAFING Sensor
  1. How to disconnect:
    CAUTION:

    When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness. 

    1. Push the lock arm.
    2. Holding outer part, pull it one step in the direction of arrow.
      G11245776Courtesy of SUBARU OF AMERICA, INC.
    3. Push the lock arm again.
    4. Holding outer part, pull it in the direction of arrow to disconnect the connector.
      G11245777Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION:

    Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked. 

    Holding the connector, push it in securely until a clicking sound is heard.

    G11245778Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.