Instrumentation System (Diagnostics): Customize: List

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION List
Item Initial setting value Setting value Contents
Air temperature correction ±0°C -5°C - +5°C Temperature compensation can only be performed by 1°C (1°C = 1.8°F) interval.
Mean fuel efficiency correction ±0% +10% - -10% -
Demonstration mode permission/fault permission OFF OFF/ON Demonstration mode must not be permitted when used by a customer.
Second level belt warning customize 2-stage warning implemented 2-stage warning implemented/2-stage warning not implemented Change the setup of second stage warning for the seat belt warning.
Fuel test signal output No Output No Output/There is Output Switch the setup of CAN transmission of the ID for FUEL evaluation.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.