SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENTATION SYSTEM & DRIVER INFORMATION CENTERMULTI-FUNCTION DISPLAY (MFD)REMOVAL
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Multi-function Display (MFD): Removal

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Removal
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE:

    For the hybrid model, disconnect the battery negative terminal. 

  2. Remove the grille assembly - CTR ventilation. Ref. to AIR CONDITIONER (EXCEPT FOR HEV)>AIR VENT GRILLE>REMOVAL>CENTER GRILLE ASSEMBLY .
  3. Remove the panel - center UPR, and remove the audio assembly or navigation assembly. Ref. to ENTERTAINMENT & MONITORING>AUDIO>REMOVAL .
  4. Remove the cover - center UPR.
    1. Release the clip and hook, and then remove the cover - center UPR.
      G11246168Courtesy of SUBARU OF AMERICA, INC.
      NOTE:

      Lightly push up the back of the cover - center UPR, hook the finger to the end portion and pull it toward you to remove it. 

  5. Remove the multi-function display.
    CAUTION:

    Be careful not to damage the multi-function display or instrument panel. 

    1. Remove the screws and release the clip.
    2. Pull the multi-function display assembly toward yourself, and disconnect the connector.
      G11246169Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the screws and then remove the multi-function display.
      G11246170Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.