Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSANTI-THEFT SYSTEM - SECURITY AND LOCKSRELAY AND FUSEINSPECTIONCHECK RELAY
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans
Check Relay
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Check Relay
- Measure the resistance between relay terminals.
Terminal No. Inspection conditions Standard Circuit 1 - 2 Always 1 MΩ or more 1 - 2 Apply battery voltage between terminals 4 and 3. Less than 1 Ω Terminal No. Inspection conditions Standard Circuit 1 - 4 Always 1 MΩ or more 1 - 4 Apply battery voltage between terminals 2 and 3. Less than 1 Ω Terminal No. Inspection conditions Standard Circuit 1 - 2 Always 1 MΩ or more 1 - 4 Always Less than 1 Ω 1 - 2 Apply battery voltage between terminals 3 and 5. Less than 1 Ω - Replace the relay if the inspection result is not within the standard value.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.