Register Immobilizer With SUBARU Select Monitor

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Register Immobilizer With SUBARU Select Monitor
NOTE:
  • A maximum of four keyless transmitters can be registered for each individual vehicle.Β 
  • When replacing or adding the keyless transmitter, new registration of transmitter is necessary.Β 
  1. Using the Subaru Select Monitor, select [Keyless ID registration] from the work support item list of [Keyless Entry]. Ref. to KEYLESS ENTRY (DIAGNOSTICS)>WORK SUPPORT .
  2. According to the directions on the screen, press the button of the transmitter to be registered in order of Lock β†’ Unlock. (When registration completed: buzzer sounds once.)
    NOTE:
    • Repeat the procedure as many times as the number of transmitters to be registered.Β 
    • When attempting to register a key that has already been registered, the buzzer sounds twice.Β 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.