Keyless Transmitter Battery

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Keyless Transmitter Battery
CAUTION:

To prevent static electricity damage to the keyless transmitter printed circuit board, touch the steel area of building with hand to discharge static electricity carried on body or clothes before disassembling the keyless transmitter.Β 

  1. Take out the transmitter case.
    1. Release the claws, and then remove the keyless transmitter cover.
      CAUTION:

      Use a flat tip screwdriver with protective tape or cloth in order not to damage the components.Β 

    2. Remove the transmitter case (A).
      G08319286Courtesy of SUBARU OF AMERICA, INC.
  2. Take out the keyless transmitter battery.
    1. Release the claws, and remove the transmitter case.
    2. Take out the keyless transmitter battery (A).
      CAUTION:

      When using a flat tip screwdriver, apply insulation tape around a flat tip screwdriver.Β 

    G08319287Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.