SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2022IMPREZA BASE, 4D SEDAN, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSANTI-THEFT SYSTEM - SECURITY AND LOCKSFRONT HOOD LOCK ASSEMBLYREMOVALLOCK ASSEMBLY
2022 Subaru Impreza Base, 4D Sedan, Automatic CVT Trans

Lock Assembly

2022 Subaru Impreza Base, 4D Sedan, Automatic CVT TransSECTION Lock Assembly
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE:

    For the hybrid model, disconnect the battery negative terminal. 

  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE DUCT>REMOVAL .
  3. Remove the cover UPR - front.
    1. Remove the clips, and remove the cover UPR - front.
    G11253597Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the lock assembly - front hood.
    1. Disconnect the connector and the clip.
    2. Remove the cable - front hood (a) and the cable - safety (b).
      G13234325Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the bolts and clips, and remove the lock assembly - front hood.
      G13235066Courtesy of SUBARU OF AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.