Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSSUBARU2016LEGACY 2.5IREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (ENGINE MECHANICAL (H6DO))CAM SPROCKETREMOVAL

2016 Subaru Legacy 2.5i

Cam Sprocket: Removal

2016 Subaru Legacy 2.5iSECTION Removal

WARNING: This page is about a different variant/trim than selected.

Remove the V-belts. < Ref. to REMOVAL , V-belt. >
Remove the crank pulley. < Ref. to REMOVAL , Crank Pulley. >
Remove the chain cover. < Ref. to REMOVAL , Chain Cover. >
Remove the timing chain assembly. < Ref. to REMOVAL , Timing Chain Assembly. >
Use the ST to lock the cam sprocket, and remove the cam sprocket bolt.
ST 499977500 CAM SPROCKET WRENCH
- IN side
  
  Fig 1: Removing Cam Sprocket Bolt - IN Side
  Courtesy of SUBARU OF AMERICA, INC.
- EX side
  
  Fig 2: Removing Cam Sprocket Bolt - EX Side
  Courtesy of SUBARU OF AMERICA, INC.
Remove the cam sprocket.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.