Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2014FORESTER 2.5I, ENG CD FB25BA, STANDARD TRANSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWARNING SYSTEMSEYESIGHT SYSTEM (DIAGNOSTICS)CAMERA ADJUSTMENT, INSPECTIONPROCEDUREPREPARATIONS
2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard Trans
Camera Adjustment, Inspection: Procedure: Preparations
2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard TransSECTION Preparations
Perform the preparation of the adjustment and inspection for the stereo camera.
- When performing adjustment or inspection by affixing RANDOM CHART onto partition
- Adjust the tire pressure.
- Prepare the Subaru Select Monitor, measure, plumb bob, weight, leveling line and RANDOM CHART (ST: 87599YC001).
- Place the vehicle on a level surface where approximately 5 m (16.4 ft) space can be secured in front of the vehicle.
- Suspend the plumb bob with leveling line from front center position of vehicle (center of license plate base), and mark the position where the plumb bob touches the ground. (Point A)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.