Symptom Chart

2014 Subaru Forester 2.5i, Eng CD FB25BA, Standard TransSECTION Symptom Chart
Symptoms Repair order Note
No display is shown.
  1. Power supply
  2. Ground circuit
  3. Communication circuit harness
  4. MFD
< Ref. to CHECK POWER SUPPLY AND GROUND CIRCUIT AND COMMUNICATION CIRCUIT , INSPECTION, Multi-function Display (MFD) System. >
Ambient air temperature/fuel economy displays do not appear.
  1. Power supply
  2. Ground circuit
  3. Communication circuit harness
  4. MFD
< Ref. to CHECK CLOCK SYSTEM COMMUNICATION CIRCUIT , INSPECTION, Multi-function Display (MFD) System. >
Only ambient air temperature display is not displayed.
  1. Power supply
  2. Harness
  3. Ambient sensor
  4. Communication circuit
  5. MFD
< Ref. to CHECK AMBIENT TEMPERATURE METER SYSTEM COMMUNICATION CIRCUIT , INSPECTION, Multi-function Display (MFD) System. >
Only fuel economy display is not displayed.
  1. Setting
  2. MFD
< Ref. to CHECK COMMUNICATION CIRCUIT OF FUEL ECONOMY SYSTEM , INSPECTION, Multi-function Display (MFD) System. >
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.