Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSUBARU2005OUTBACK I, STANDARDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLBRAKES - ABS (DIAGNOSTICS)SUBARU SELECT MONITOROPERATIONCLEAR MEMORY MODE
2005 Subaru Outback i, Standard
Clear Memory Mode
2005 Subaru Outback i, StandardSECTION Clear Memory Mode
- On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
- On the << System Selection Menu >> display screen, select the {Brake Control} and press the [YES] key.
- Press the [YES] key after the {ABS} is displayed.
- On the << Brake Control Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.SUBARU MONITOR CONTENTS DISPLAY DETAILS
Display Contents to be monitored Clear memory? Function of clearing DTC. - When "Done" and "Turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE:
For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.