Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Saab 9-5 Linear, AutomaticFACTORY OEM SERVICE PROCEDURE
Abs 5.4
- Adjustment - Replacement
- Component location
- Brake light switch (29)
- Wheel speed sensor, front left (298FL)
- Wheel speed sensor, front right (298FR)
- Wheel speed sensor, rear left (298RL)
- Wheel speed sensor, rear right (298RR)
- Data link connector, 16-pin, CARB (445)
- Main instrument unit (540)
- ABS control module (547)
- Trionic control module, 4-cyl petrol (589)
- Control module, PSG16, contact K (595K)
- Navigation unit (635)
- Navigation system connector (635h)
- Connector H10-15
- Connector H16-5
- Connector H33-1
- Connector H42-5
- Connector H43-1
- Connector H43-2
- Crimp connection J2, front harness
- Crimp connection J4, front harness
- Crimp connection J9, front harness
- Crimp connection J10, front harness
- Crimp connection J11, front harness
- Crimp connection J12, front harness
- Crimp connection J58, instrument harness
- Crimp connection J61, instrument harness
- Crimp connection J108, rear harness
- Crimp connection J109, rear harness
- Crimp connection J110, rear harness
- Crimp connection J111, rear harness
- Crimp J203, front harness
- Crimp J215, front harness
- Grounding point G2
- Grounding point G30
- Grounding point G40
- Grounding point G42
- Fault diagnosis, fault codes
- C1371: Wheel Sensor Front Left. Signal Incorrect
- C1372: Wheel Sensor Front Left. No Signal
- C1376: Wheel Sensor Front Right. Signal Incorrect
- C1377: Wheel Sensor Front Right. No Signal
- C1381: Wheel Sensor Rear Left. Signal Incorrect
- C1382: Wheel Sensor Rear Left. No Signal
- C1386: Wheel Sensor Rear Right. Signal Incorrect
- C1387: Wheel Sensor Rear Right. No Signal
- C1390: Wheel Sensor. Wrong Number of Teeth
- C1532: Battery Voltage. Too Low
- C1540: Solenoids. Open Circuit
- C1605: Control module fault
- C2415, C2450, C2455, C2485: Solenoid Valves Rear Left/Right Incorrect & Solenoid Valves Front Left/Right Incorrect
- C2465: Pump Motor. Incorrect
- C2470 : Brake Light Switch. Open Circuit
- Fault diagnosis, general
- Fault diagnosis, symptoms
- Special tools
- Technical data
- Technical description
- ABS 5.4: System overview
- Main components
- The ABS 5.4 system in brief
- Control module inputs
- Control module outputs
- Control module
- Power supply: Battery voltage (+30 circuit)
- Control module ground
- Front-wheel sensors
- Rear-wheel sensors
- Wheel-speed signal output
- Brake-light switch
- Return pump
- Valve block
- Function
- ABS modulation
- Electronic brake-force distribution (EBD)
- Brakes off
- Braking without ABS modulation
- Braking with ABS modulation
- ABS warning light
- Data link
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
