Front Door Opening Weatherstrip Replacement (Sedan)

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Front Door Opening Weatherstrip Replacement (Sedan)
Fig 1: View Of Front Door Opening Weatherstrip
GM1569769Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 1

Callout Component Name
Fastener Tightening Specifications:Β  Refer to Fastener Tightening SpecificationsΒ .

Preliminary Procedures

  1. Remove the front carpet retainer. Refer to Carpet Retainer Replacement - Front .
  2. Remove the lower rear lock pillar trim panel. Refer to Trim Panel Replacement - Body Lock Pillar Lower (Sedan) or Trim Panel Replacement - Body Lock Pillar Lower (Convertible) or Trim Panel Replacement - Body Lock Pillar Lower (Coupe) .
  3. Remove the lower center pillar garnish molding. Refer to Garnish Molding Replacement - Center Pillar Lower .
1 Weatherstrip, Front Door Opening
Tip:Β  Pull the weatherstrip from the door opening flange.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.