SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSDOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEMSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Pontiac G6 GTP, 2D Coupe, Standard

Fastener Tightening Specifications

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Fastener Tightening Specifications
Fastener Tightening Specifications

Application Specification
Metric English
Auxiliary Weatherstrip Retainer Bolt 2 N.m 18 lb in
Door Arm Rest Screw 3 N.m 27 lb in
Door Glass Front Upstop-to-Door Glass Nut 6 N.m 53 lb in
Door Glass Rear Guide Retainer 6 N.m 53 lb in
Door Guide Pin Locator Screw 11 N.m 97 lb in
Door Guide Pin Screw 11 N.m 97 lb in
Door Hinge Bolt 26 N.m 19 lb ft
Door Hinge Nut 26 N.m 19 lb ft
Door Lock Screws 10 N.m 89 lb in
Door Rearview Mirror Nut 6 N.m 53 lb in
Door Sealing Strip Screw 2 N.m 18 lb in
Door Trim Panel Lower Screw 2.5 N.m 23 lb in
Door Trim Pull Cup Screw 2.5 N.m 23 lb in
Door Window Frame Applique Screw 2 N.m 20 lb in
Front and Rear Channel Adjustment Nutwasher 10 N.m 88 lb in
Front Channel-to-Door Stud Nuts 6 N.m 53 lb in
Front Door Upper Trim Finish Panel Screw 1 N.m 9 lb in
Lower Window Channel Bolt 6 N.m 53 lb in
Mirror Motor Retaining Screw 10 N.m 89 lb in
Mirror Set Screw 1 N.m 12 lb in
Rear Door Energy Absorber Bolt 2 N.m 18 lb in
Rear Door Lower Sealing Strip Screw 2 N.m 18 lb in
Rear Upper Extension-to-Door Nutwasher 6 N.m 53 lb in
Rear Upper Extension-to-Rear Channel Nutwasher 6 N.m 53 lb in
Rear Upstop Bracket Bolt 6 N.m 53 lb in
Regulator Bolts 10 N.m 89 lb in
Regulator Nuts 10 N.m 89 lb in
Reveal Molding Screw 6 N.m 53 lb in
Side Access Door Pull Handle Screw 2.5 N.m 23 lb in
Stabilizer Lock Nut 6 N.m 53 lb in
Stationary Window Channel Bolt 10 N.m 89 lb in
Striker Bolt 25 N.m 18 lb ft
Upper Window Channel Retainer Upper Bolt 2 N.m 18 lb in
Window Regulator-to-Door Screw 6 N.m 53 lb in
Window Sash Nuts 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.