ACTUATOR TEST Mode

1994 Plymouth Sundance Base, 2D Hatchback, 2.2 D, AutomaticSECTION ACTUATOR TEST Mode
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

This function allows user to check for proper operation of output circuits or devices, which PCM cannot internally recognize. DRB allows PCM to activate these outputs or devices, allowing an observer to verify proper operation.

Most tests available in this mode provide an audible or visual indication of device operation (click of relay contacts, spray fuel, etc.). With exception of an intermittent condition, if a device functions properly during its test, it can be assumed that device, wiring and its driver circuit are functioning properly.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.