Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE1998ACHIEVA 3.1 M, 4T40E/MN4REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 4 (ANTI-LOCK BRAKE SYSTEM WITH TRACTION CONTROL SYSTEM - BOSCH 5.3)REMOVAL & INSTALLATIONBRAKE PRESSURE MODULATOR VALVE (BPMV)INSTALLATION
1998 Oldsmobile Achieva 3.1 M, 4T40E/MN4
Brake Pressure Modulator Valve (BPMV): Installation
1998 Oldsmobile Achieva 3.1 M, 4T40E/MN4SECTION Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1999 Pontiac Grand Prix, 1999 Pontiac Firebird, 1999 Oldsmobile Intrigue, 1999 Chevrolet Camaro, and 1998 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Ensure brakelines are installed in original locations. If installing a NEW BPMV, ensure shipping plugs are removed from valve openings. Tighten screws, nuts and brakelines to specification. See TORQUE SPECIFICATIONS.
- Refill brake master cylinder reservoir, bleed brakes and check for leaks. See BLEEDING BRAKE SYSTEM. Turn ignition on, with engine off. Perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.