SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2013JUKE SL, 4WDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSMISSIONSYSTEM DESCRIPTIONSTRUCTURE AND OPERATIONMECHANICAL SYSTEMMECHANICAL SYSTEM: SYSTEM DESCRIPTIONPOWER TRANSMISSION
2013 Nissan-Datsun Juke SL, 4WD

Power Transmission

2013 Nissan-Datsun Juke SL, 4WDSECTION Power Transmission

"P" position

  • Traction force from input shaft is not transmitted to primary pulley because forward clutch and reverse brake are not engaged and run idle.
  • Torque from the wheels is not transmitted to secondary pulley because secondary pulley is mechanically fixed when parking pole that is linked with selector lever is engaged with parking gear that is integrated with secondary pulley.
    Fig 1: Mechanical System Diagram (P Position)
    G08706694Courtesy of NISSAN NORTH AMERICA, INC.
PLANETARY GEAR

Name Sun gear Planet carrier Internal gear
Condition Stop Idled Input
Direction of rotation - - Clockwise revolution

"R" position

  • Traction force from input shaft rotates sun gear in opposite direction of input shaft rotation because reverse brake is engaged and planetary gear is fixed.
  • Therefore primary pulley rotates in opposite direction of input shaft rotation and traction force output is in opposite direction rotation.
    Fig 2: Mechanical System Diagram (R Position)
    G08706695Courtesy of NISSAN NORTH AMERICA, INC.
PLANETARY GEAR

Name Sun gear Planet carrier Internal gear
Condition Output Fixed Input
Direction of rotation Counterclockwise revolution - Clockwise revolution

"N" position

  • Traction force from input shaft is not transmitted to primary pulley because forward clutch and reverse brake are not engaged and run idle.
  • Torque from wheel is not transmitted to input shaft because forward clutch and reverse brake are not engaged and planetary carrier runs idle.
    Fig 3: Mechanical System Diagram (N Position)
    G08706696Courtesy of NISSAN NORTH AMERICA, INC.
PLANETARY GEAR

Name Sun gear Planet carrier Internal gear
Condition Stop Idle Input
Direction of rotation - - Clockwise revolution

"D" position

  • Traction force from input shaft rotates sun gear via forward clutch in the same direction of input shaft because forward clutch is engaged.
  • Therefore primary pulley rotates in the same direction of input shaft rotation and traction force output is in the same direction rotation.
    Fig 4: Mechanical System Diagram (D Position)
    G08706697Courtesy of NISSAN NORTH AMERICA, INC.
PLANETARY GEAR

Name Sun gear Planet carrier Internal gear
Condition Input/output Idle Input
Direction of rotation Clockwise revolution - Clockwise revolution
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.