SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2013JUKE SL, 4WDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSMISSIONSYSTEM DESCRIPTIONCOMPONENT PARTSCVT CONTROL SYSTEMCVT CONTROL SYSTEM: SECONDARY PRESSURE SOLENOID VALVE
2013 Nissan-Datsun Juke SL, 4WD

CVT CONTROL SYSTEM: Secondary Pressure Solenoid Valve

2013 Nissan-Datsun Juke SL, 4WDSECTION CVT CONTROL SYSTEM: Secondary Pressure Solenoid Valve
  • The secondary pressure solenoid valve is installed to control valve.
  • The secondary pressure solenoid valve controls the secondary valve. For information about the secondary valve, refer to "MECHANICAL SYSTEM: COMPONENT DESCRIPTION ".
  • The secondary pressure solenoid valve uses the linear solenoid valve [N/H (normal high) type].
    NOTE:
    • The principle of the linear solenoid valve utilizes the fact that the force pressing on the valve spool installed inside the coil increases nearly in proportion to the current. This allows it to produce a fluid pressure that is proportional to this pressing force.
    • The N/H (normal high) produces hydraulic control when the coil is not energized.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.