Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSNISSAN-DATSUN2013JUKE SL, 4WDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSMISSIONSYMPTOM DIAGNOSISSYSTEM SYMPTOMSYMPTOM TABLE

2013 Nissan-Datsun Juke SL, 4WD

Symptom Table

2013 Nissan-Datsun Juke SL, 4WDSECTION Symptom Table

The diagnostics item numbers show the sequence for inspection. Inspect in order from item 1.

No.	Item	Symptom	Condition	Diagnostic Item	Reference
1	Shift Shock	Large shock. ("N" → "D" position)	ON vehicle	1. Engine idle speed	BASIC INSPECTION
				2. Engine speed signal	P0725 ENGINE SPEED
				3. Accelerator pedal position sensor	P1705 TP SENSOR
				4. CVT position	CVT POSITION
				5. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				6. CAN communication line	U1000 CAN COMM CIRCUIT
				7. CVT fluid level and state	CVT FLUID
				8. Line pressure test	LINE PRESSURE TEST
				9. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
				10. Lock-up select solenoid valve	P1740 SELECT SOLENOID
				11. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
				12. Control valve	CONTROL VALVE
			OFF vehicle	13. Forward clutch	AWD
2	Shift Shock	Large shock. ("N" → "R" position)	ON vehicle	1. Engine idle speed	BASIC INSPECTION
				2. Engine speed signal	P0725 ENGINE SPEED
				3. Accelerator pedal position sensor	P1705 TP SENSOR
				4. CVT position	CVT POSITION
				5. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				6. CAN communication line	U1000 CAN COMM CIRCUIT
				7. CVT fluid level and state	CVT FLUID
				8. Line pressure test	LINE PRESSURE TEST
				9. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
				10. Lock-up select solenoid valve	P1740 SELECT SOLENOID
				11. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
				12. Control valve	CONTROL VALVE
			OFF vehicle	13. Reverse brake	AWD
3	Shift Shock	Shock is too large for lock-up.	ON vehicle	1. CVT position	CVT POSITION
				2. Engine speed signal	P0725 ENGINE SPEED
				3. CAN communication line	U1000 CAN COMM CIRCUIT
				4. CVT fluid level and state	CVT FLUID
				5. Control valve	CONTROL VALVE
			OFF vehicle	6. Torque converter	UNIT DISASSEMBLY AND ASSEMBLY
4	Slips/Will Not Engage	Vehicle cannot be started from "D" position.	ON vehicle	1. CVT fluid level and state	CVT FLUID
				2. CVT position	CVT POSITION
				3. CAN communication line	U1000 CAN COMM CIRCUIT
				4. Line pressure test	LINE PRESSURE TEST
				5. Stall test	STALL TEST
				6. Step motor	P1777 STEP MOTOR
				7. Primary speed sensor	P0715 INPUT SPEED SENSOR A
				8. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
				9. Accelerator pedal position sensor	P1705 TP SENSOR
				10. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				11. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
				12. Power supply	P1701 TCM
				13. Control valve	CONTROL VALVE
			OFF vehicle	14. Oil pump assembly	AWD
				15. Forward clutch
				16. Parking components
5		Vehicle cannot be started from "R" position.	ON vehicle	1. CVT fluid level and state	CVT FLUID
				2. CVT position	CVT POSITION
				3. CAN communication line	U1000 CAN COMM CIRCUIT
				4. Line pressure test	LINE PRESSURE TEST
				5. Stall test	STALL TEST
				6. Step motor	P1777 STEP MOTOR
				7. Primary speed sensor	P0715 INPUT SPEED SENSOR A
				8. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
				9. Accelerator pedal position sensor	P1705 TP SENSOR
				10. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				11. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
				12. Power supply	P1701 TCM
				13. Control valve	CONTROL VALVE
			OFF vehicle	14. Oil pump assembly	AWD
				15. Reverse brake
				16. Parking components
6		Does not lock-up.	ON vehicle	1. CVT fluid level and state	CVT FLUID
				2. Line pressure test	LINE PRESSURE TEST
				3. Engine speed signal	P0725 ENGINE SPEED
				4. Primary speed sensor	P0715 INPUT SPEED SENSOR A
				5. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
				6. CAN communication line	U1000 CAN COMM CIRCUIT
				7. Stall test	STALL TEST
				8. Step motor	P1777 STEP MOTOR
				9. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
				10. Lock-up select solenoid valve	P1740 SELECT SOLENOID
				11. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				12. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
				13. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
				14. Control valve	CONTROL VALVE
			OFF vehicle	15. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			OFF vehicle	16. Oil pump assembly	AWD
7		Does not hold lock-up condition.	ON vehicle	1. CVT fluid level and state	CVT FLUID
				2. Line pressure test	LINE PRESSURE TEST
				3. Engine speed signal	P0725 ENGINE SPEED
				4. Primary speed sensor	P0715 INPUT SPEED SENSOR A
				5. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
				6. CAN communication line	U1000 CAN COMM CIRCUIT
				7. Stall test	STALL TEST
				8. Step motor	P1777 STEP MOTOR
				9. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
				10. Lock-up select solenoid valve	P1740 SELECT SOLENOID
				11. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				12. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
				13. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
				14. Control valve	CONTROL VALVE
			OFF vehicle	15. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			OFF vehicle	16. Oil pump assembly	AWD
8	Lock-up is not released.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Line pressure test	LINE PRESSURE TEST
			3. Engine speed signal	P0725 ENGINE SPEED
			4. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			5. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
			6. CAN communication line	U1000 CAN COMM CIRCUIT
			7. Stall test	STALL TEST
			8. Control valve	CONTROL VALVE
		OFF vehicle	9. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
		OFF vehicle	10. Oil pump assembly	AWD
9	With selector lever in "D" position, acceleration is extremely poor.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Line pressure test	LINE PRESSURE TEST
			3. Stall test	STALL TEST
			4. Accelerator pedal position sensor	P1705 TP SENSOR
			5. CAN communication line	U1000 CAN COMM CIRCUIT
			6. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
			7. CVT position	CVT POSITION
			8. Step motor	P1777 STEP MOTOR
			9. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			10. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
			11. Accelerator pedal position sensor	P1705 TP SENSOR
			12. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
			13. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
			14. Power supply	P1701 TCM
			15. Control valve	CONTROL VALVE
		OFF vehicle	16. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			17. Oil pump assembly	AWD
			18. Forward clutch	AWD
10	With selector lever in "R" position, acceleration is extremely poor.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Line pressure test	LINE PRESSURE TEST
			3. Stall test	STALL TEST
			4. Accelerator pedal position sensor	P1705 TP SENSOR
			5. CAN communication line	U1000 CAN COMM CIRCUIT
			6. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
			7. CVT position	CVT POSITION
			8. Step motor	P1777 STEP MOTOR
			9. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			10. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
			11. Accelerator pedal position sensor	P1705 TP SENSOR
			12. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
			13. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
			14. Power supply	P1701 TCM
			15. Control valve	CONTROL VALVE
		OFF vehicle	16. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			17. Oil pump assembly	AWD
			18. Reverse brake	AWD
11	Slips at lock-up.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Line pressure test	LINE PRESSURE TEST
			3. Engine speed signal	P0725 ENGINE SPEED
			4. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			5. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
			6. CAN communication line	U1000 CAN COMM CIRCUIT
			7. Stall test	STALL TEST
			8. Step motor	P1777 STEP MOTOR
			9. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
			10. Lock-up select solenoid valve	P1740 SELECT SOLENOID
			11. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
			12. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
			13. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
			14. Control valve	CONTROL VALVE
		OFF vehicle	15. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
		OFF vehicle	16. Oil pump assembly	AWD
12	Other	No creep at all.	ON vehicle	1. CVT fluid level and state	CVT FLUID
				2. Line pressure test	LINE PRESSURE TEST
				3. Accelerator pedal position sensor	P1705 TP SENSOR
				4. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
				5. CAN communication line	U1000 CAN COMM CIRCUIT
				6. Stall test	STALL TEST
				7. CVT position	CVT POSITION
				8. Step motor	P1777 STEP MOTOR
				9. Primary speed sensor	P0715 INPUT SPEED SENSOR A
				10. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
				11. Accelerator pedal position sensor	P1705 TP SENSOR
				12. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				13. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
				14. Power supply	P1701 TCM
				15. Control valve	CONTROL VALVE
			OFF vehicle	16. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
				17. Oil pump assembly	AWD
				18. Gear system
				19. Forward clutch
				20. Reverse brake
13		Vehicle cannot run in all positions.	ON vehicle	1. CVT fluid level and state	CVT FLUID
				2. Line pressure test	LINE PRESSURE TEST
				3. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
				4. Stall test	STALL TEST
				5. CVT position	CVT POSITION
				6. Step motor	P1777 STEP MOTOR
				7. Primary speed sensor	P0715 INPUT SPEED SENSOR A
				8. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
				9. Accelerator pedal position sensor	P1705 TP SENSOR
				10. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				11. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
				12. Power supply	P1701 TCM
				13. Control valve	CONTROL VALVE
			OFF vehicle	14. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
				15. Oil pump assembly	AWD
				16. Gear system
				17. Forward clutch
				18. Reverse brake
				19. Parking components
14		With selector lever in "D" position, driving is not possible.	ON vehicle	1. CVT fluid level and state	CVT FLUID
				2. Line pressure test	LINE PRESSURE TEST
				3. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
				4. Stall test	STALL TEST
				5. CVT position	CVT POSITION
				6. Step motor	P1777 STEP MOTOR
				7. Primary speed sensor	P0715 INPUT SPEED SENSOR A
				8. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
				9. Accelerator pedal position sensor	P1705 TP SENSOR
				10. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
				11. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
				12. Power supply	P1701 TCM
				13. Control valve	CONTROL VALVE
			OFF vehicle	14. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
				15. Oil pump assembly	AWD
				16. Gear system
				17. Forward clutch
				18. Parking components
15		With selector lever in "R" position, driving is not possible.	ON vehicle	1. CVT fluid level and state	CVT FLUID
				2. Line pressure test	LINE PRESSURE TEST
				3. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
				4. Stall test	STALL TEST
				5. CVT position	CVT POSITION
				6. Step motor	P1777 STEP MOTOR
				7. Primary speed sensor	P0715 INPUT SPEED SENSOR A
	8. Secondary speed sensor			P0720 OUTPUT SPEED SENSOR
	9. Accelerator pedal position sensor			P1705 TP SENSOR
	10. CVT fluid temperature sensor			P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
	11. Secondary pressure sensor			P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
	12. Power supply			P1701 TCM
	13. Control valve			CONTROL VALVE
	OFF vehicle		14. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			15 Oil pump assembly	AWD
			16. Gear system
			17. Reverse brake
			18. Parking components
16	Judder occurs during lock-up.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Engine speed signal	P0725 ENGINE SPEED
			3. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			4. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
			5. Accelerator pedal position sensor	P1705 TP SENSOR
			6. CAN communication line	U1000 CAN COMM CIRCUIT
			7. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
			8. Control valve	CONTROL VALVE
		OFF vehicle	9. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
17	Strange noise in "D" position.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Engine speed signal	P0725 ENGINE SPEED
			3. CAN communication line	U1000 CAN COMM CIRCUIT
			4. Control valve	CONTROL VALVE
		OFF vehicle	5. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			6. Oil pump assembly	AWD
			7. Gear system
			8. Forward clutch
			9. Bearing
18	Strange noise in "R" position.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Engine speed signal	P0725 ENGINE SPEED
			3. CAN communication line	U1000 CAN COMM CIRCUIT
			4. Control valve	CONTROL VALVE
		OFF vehicle	5. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			6. Oil pump assembly	AWD
			7. Gear system
			8. Reverse brake
19	Strange noise in "N" position.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Engine speed signal	P0725 ENGINE SPEED
			3. CAN communication line	U1000 CAN COMM CIRCUIT
			4. Control valve	CONTROL VALVE
		OFF vehicle	5. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			6. Oil pump assembly	AWD
			7. Gear system	AWD
20	Vehicle does not decelerate by engine brake.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. CVT position	CVT POSITION
			3. CAN communication line	U1000 CAN COMM CIRCUIT
			4. Step motor	P1777 STEP MOTOR
			5. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			6. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
			7. Line pressure test	LINE PRESSURE TEST
			8. Engine speed signal	P0725 ENGINE SPEED
			9. Accelerator pedal position sensor	P1705 TP SENSOR
			10. Control valve	AWD
21	Maximum speed low.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Line pressure test	LINE PRESSURE TEST
			3. Accelerator pedal position sensor	P1705 TP SENSOR
			4. CAN communication line	U1000 CAN COMM CIRCUIT
			5. Stall test	STALL TEST
			6. Step motor	P1777 STEP MOTOR
			7. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			8. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
			9. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
			10. CVT fluid temperature sensor	P0710 TRANSMISSION FLUID TEMPERATURE SENSOR A
			11. Control valve	CONTROL VALVE
		OFF vehicle	12. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
			13. Oil pump assembly	AWD
			14. Gear system
			15. Forward clutch
22	With selector lever in "P" position, vehicle does not enter parking condition or, with selector lever in another position, parking condition is not cancelled.	ON vehicle	1. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
		ON vehicle	2. CVT position	CVT POSITION
		OFF vehicle	3. Parking components	AWD
23	Vehicle runs with CVT in "P" position.	ON vehicle	1. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
			2. CVT fluid level and state	CVT FLUID
			3. CVT position	CVT POSITION
			4. Control valve	CONTROL VALVE
		OFF vehicle	5. Parking components	AWD
		OFF vehicle	6. Gear system	AWD
24	Vehicle runs with CVT in "N" position.	ON vehicle	1. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
			2. CVT fluid level and state	CVT FLUID
			3. CVT position	CVT POSITION
			4. Control valve	CONTROL VALVE
		OFF vehicle	5. Gear system	AWD
			6. Forward clutch
			7. Reverse brake
25	Engine stall.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Engine speed signal	P0725 ENGINE SPEED
			3. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			4. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
			5. CAN communication line	U1000 CAN COMM CIRCUIT
			6. Stall test	STALL TEST
			7. Secondary pressure sensor	P0840 TRANSMISSION FLUID PRESSURE SEN/SW A
			8. Control valve	CONTROL VALVE
		OFF vehicle	9. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
26	Engine stalls when selector lever shifted "N" → "D" or "R".	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Engine speed signal	P0725 ENGINE SPEED
			3. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			4. Torque converter clutch solenoid valve	P0740 TORQUE CONVERTER
			5. CAN communication line	U1000 CAN COMM CIRCUIT
			6. Stall test	STALL TEST
			7. Control valve	CONTROL VALVE
		OFF vehicle	8. Torque converter	TORQUE CONVERTER AND CONVERTER HOUSING OIL SEAL
27	Engine speed does not return to idle.	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. Accelerator pedal position sensor	P1705 TP SENSOR
			3. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
			4. CAN communication line	U1000 CAN COMM CIRCUIT
			5. Control valve	AWD
28	CVT does not shift	ON vehicle	1. CVT fluid level and state	CVT FLUID
			2. CVT position	CVT POSITION
			3. Line pressure test	LINE PRESSURE TEST
			4. Engine speed signal	P0725 ENGINE SPEED
			5. Accelerator pedal position sensor	P1705 TP SENSOR
			6. CAN communication line	U1000 CAN COMM CIRCUIT
			7. Primary speed sensor	P0715 INPUT SPEED SENSOR A
			8. Secondary speed sensor	P0720 OUTPUT SPEED SENSOR
			9. Step motor	P1777 STEP MOTOR
			10. Control valve	CONTROL VALVE
		OFF vehicle	11. Oil pump assembly	AWD
29	Engine does not start in "N" or "P" position.	ON vehicle	1. Ignition switch and starter	WIRING DIAGRAM - IGNITION POWER SUPPLY - , SYMPTOM DIAGNOSIS
			2. CVT position	CVT POSITION
			3. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
30	Engine starts in positions other than "WIRING DIAGRAM - IGNITION POWER SUPPLY - " or "P".	ON vehicle	1. Ignition switch and starter	WIRING DIAGRAM - IGNITION POWER SUPPLY - , SYMPTOM DIAGNOSIS
			2. CVT position	CVT POSITION
			3. Transmission range switch	P0705 TRANSMISSION RANGE SENSOR A
31	When brake pedal is depressed with ignition switch ON, selector lever cannot be shifted from "WIRING DIAGRAM - IGNITION POWER SUPPLY - " position to other position.	ON vehicle	1. Stop lamp switch	SHIFT LOCK SYSTEM
			2. Shift lock solenoid
			3. CVT shift selector
32	When brake pedal is not depressed with ignition switch ON, selector lever can be shifted from "P" position to other position.	ON vehicle	1. Stop lamp switch	SHIFT LOCK SYSTEM
			2. Shift lock solenoid
			3. CVT shift selector
33	Cannot be changed to manual mode.	ON vehicle	1. Manual mode switch	P0826 UP AND DOWN SHIFT SW
			2. CAN communication line	U1000 CAN COMM CIRCUIT
			3. Combination meters	POWER SUPPLY AND GROUND CIRCUIT
34	CVT indicator lamp does not come on.	ON vehicle	1. CAN communication line	U1000 CAN COMM CIRCUIT
			2. Combination meters	POWER SUPPLY AND GROUND CIRCUIT
			3. TCM power supply and ground	P1701 TCM

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.