SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2013JUKE SL, 4WDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSMISSIONREMOVAL AND INSTALLATIONCVT SHIFT SELECTORDISASSEMBLY AND ASSEMBLYASSEMBLY
2013 Nissan-Datsun Juke SL, 4WD

Disassembly and Assembly: Assembly

2013 Nissan-Datsun Juke SL, 4WDSECTION Assembly

Note the following, and assemble in the reverse order of disassembly.

  • Follow the procedure below and place the selector knob onto the CVT shift selector.
  1. Install the lock pin (2) onto the selector lever knob (3).
  2. Install the knob cover (1) onto the selector lever knob.
  3. Press the selector lever knob onto the selector lever until it clicks.
    CAUTION:
    • When pressing the selector lever knob onto the selector lever, never press the selector lever knob button.
    • Never strike the selector lever knob to press it into place.
      Fig 1: Identifying Lock Pin, Selector Lever Knob And Knob Cover
      G08706761Courtesy of NISSAN NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.